AT-TS-13 Surface Sensing Thermostat
Raychem AT-TS-13 Heating Cable Thermostat
The Raychem AT-TS-13 is an electronic thermostat designed for use with Raychem self-regulating heating cables in pipe freeze protection and temperature maintenance applications. Suitable for safe, non-hazardous areas, it offers an adjustable temperature range of -5°C to +15°C.
Temperature Control and Operation
The AT-TS-13 supports line-sensing and ambient-sensing operation. The temperature set point can be viewed through a window in the enclosure lid, while integrated LED indicators show when the heating cable is energised or when a temperature sensor fault occurs, including a sensor break or short circuit.
The supplied temperature sensor cable is approximately 3 metres long and can be shortened for ambient-sensing operation. Direct connection of the heating cable is possible, with suitable connection kits ordered separately.
Key Features and Benefits
Compatible with Raychem self-regulating heating cables
IP65-rated enclosure for outdoor installation in suitable non-hazardous locations
Wall-mountable design
Electrical Specifications
Supply voltage: 230 V AC, +10% / -15%, 50/60 Hz
Maximum switching current: 16 A at 250 V AC
Power consumption: Maximum 1.8 VA
Switching differential: 0.6 K to 1 K
Switching accuracy: ±1 K at 5°C (calibration point)
Output switching: Single-pole, single-throw (SPST), normally open
Adjustable temperature range: -5°C to +15°C
Enclosure and Installation Specifications
Operating ambient temperature: -20°C to +50°C
Enclosure material: ABS plastic
Dimensions: 122 × 120 × 55 mm (W × H × D)
Mounting: Wall mounting or compatible mounting brackets
Connection kits: Ordered separately
Applications
The Raychem AT-TS-13 is suitable for:
Water pipe freeze protection
External pipework frost protection
Commercial and industrial pipework
Building services trace heating systems
The Raychem AT-TS-13 offers straightforward, dependable temperature control for self-regulating heating cables in pipe freeze protection applications.